Automatic PWM M1-03
The automatic PWM provides the regulation of the current of the consumption of the system to generations of the gas of the brown and leaving the gas.
There is a current stabilization and adjustment of current depending on the speed.
Discount Coupons 2%*: 17258
*Coupon valid only until 03.06.2023.
179.19 $
To place your order, please fill out the form below. Within a few hours you will contact the manager and clarify details of the order and delivery time.
Automatic PWM M1-03 is an improved modification of the automatic PWM M1-02 and is designed to control the electrolysis process, provides adjustment of the current consumption of the system and the gas outlet. This allows you to unload an electric generator, without prejudice to the effectiveness of the system. Likewise, when working in conjunction with the optimizer (EFIE), the automatic PWM allows you to control mixture formation, depending on the mode of the engine and the amount of produced gas. Avtomatic PWM have the ability to adjust the working frequency, which can also be used to achieve best results.
Automatic PWM M1-03 has a connector for external control that lets you combine several automatic PWMs in a single system. This system can operate on the required algorithm.
Automatic PWM with a current sensor M1-03 is designed so that the current limit is select tuner and is in the range of 5 ... 35A. Avtomatic PWM has an integrated current sensor that can stabilize the current (and hence the production of gas), even with a strong change in the density of the electrolyte.
Included with the modulator is supplied remote indicator light "norm" , which duplicates the indicator on the modulator output and the vehicle's interior . This LED indicates normal operation of the system and the density of the electrolyte ( if the current and gas production can be maintained within a predetermined range ) .
Device is almost no heat , has passive cooling due to the high energy conversion efficiency , which is achieved by the use of modern electronic database with the right approach . The device used a powerful filter for complete suppression of PWM operation .
We do not save for parts and get a decent result.
Protection is provided at overheat electrolizer. When temperature exceeds 77oC power to the electrolyzer is not supplied (optional). In the same way protection is provided at overheat of the modulator (110оС).
In combination with a PWM supplied remote indicator light "norm", which duplicates the indicator on PWM and is removed in salon of the car. This indicator signalizes about normal functioning (working) the system (if current and production of the gas can be supported in given range).
Technical specifications of the avtomatic PWM M1-03
|
|
|
|
Current limit (current limit), A |
5 … 35 (controlled) |
|
Worker PWM frequency (controlled), KHz |
0,25 … 3 |
|
Range of the automatic regulation comsumed to powers and leaving the gas, % |
0 … 100 |
|
Possibility of the association PWM |
Yes |
|
Maximum worker temperature of electrolizer (threshold when the protection working), оС |
77 Optional |
|
Protection from overheat of the body of the PWM. оС |
110 |
|
Stabilization of output current |
There |
|
Protection from short circuit in the electrolizer |
Yes (95А) |
|
Protection from overheat of PWM |
Yes, 120oC |
|
Worker voltage, V |
10 … 28 |
|
Built-in filter of the feeding |
Yes |
|
Indication to density of the solution (Indicator "norm") |
Yes |
|
Threshold current of the glow indicator "norm" (an indicator of the density of the solution), , А |
12 or 25 (Switchable) |
|
Regulation to sensitivity of the sensor to detonations |
Yes (auto) |
Ability to adjust the current value depending on the rotational speed
Wiring
Мой электролиз
Постоянно мучился с подгонкой тока электролизера - ток постоянно изменялся. Показания смотрел на амперметре в салоне машины.
После установки модулятора вообще забыл про эти проблемы. Ток теперь постоянно на заданном уровне (амперметр в салоне я оставил).
Доволен как слон!
You can return any product purchased from us within 2 weeks, if for some reason it does not suit you or you do not like it. Also, we provide a free test of the Brown's gas generator for a period up to 1 month!
On all products we sell, we offer a guarantee for a period from 1 to 2 years (depending on the type of product).
Most of goods we offer can improve the performance of a car without violation of the guarantee for it.
Most of the products we offer we produce ourselves! This enables our customers not only to purchase products at competitive prices, but also to make clear immediately all the questions they have on the installation and use of the devices.
+38 (067) 680-34-57
hotline
Nissan Maxima
Уже давно катаюсь с водородом. Решил установить модулятор. Теперь не представляю как раньше я без него ездил. Очень ощутимые преимущества!