alternative chip tuning SD-04
alternative chip tuning SD-04

alternative chip tuning SD-04

To itself CHIP tuning! The Processor optimizer (EFIE) fuel mixture for ingector SD-04

Optimizers is intended for correcting the factors of the engine. Can be used as alternative CHIP tuning engine for Your auto. This equipment under power even that cars, on which CHIP tuning is difficult.

Артикул: 04002

Discount Coupons 2%*: 428c1
*Coupon valid only until 22.11.2017.

alternative chip tuning SD-04
alternative chip tuning SD-04

To itself CHIP tuning! The Processor optimizer (EFIE) fuel mixture for ingector SD-04

Optimizers is intended for correcting the factors of the engine. Can be used as alternative CHIP tuning engine for Your auto. This equipment under power even that cars, on which CHIP tuning is difficult.

2 400 грн

To place your order, please fill out the form below. Within a few hours you will contact the manager and clarify details of the order and delivery time.

Quantity of goods Your name Telephone number* E-Mail* Comment to the order Discount Coupons: Partner code:

Shipping...

Control presenting fuel is produced by way to correction signal sensor of the oxygen (Oxygen Sensor) and sensor of the mass consuption of the air (MAP, MAF sensor) on program, which defines user

фото устройства альтернативного чип тюнинга

It Is Supported absolutely all sensors of the oxygen (Oxygen Sensor) MAF, and absolute pressure.

The Optimizer is completed by software, which allows to connect it to computer, read and write all parameters a real-time, read the consuption a fuel, produce adjustment not stopping engine. The Provided conclusion given on graphs. There is possibility to save and write 3-h measured tables to correction sensor (MAF, MAP).

In optimizer is provided two states of working:  simplified  and  extended .

 In simplified mode user defines whole several main parameters, influencing upon correction. In this mode degree to correction increases with growing of the consumption fuel. . Withincreasing a certain threshold speed the correction may decrease (defines theuser).

In advanced mode, the user can compile a detailed 3D map of correction signals depending on the time of fuel injection and crank shaft rotation separately for the Oxygen Sensor and MAF. Such settings allow you to achieve exactly a good result and reduce fuel consumption, and for racers - to achieve maximum power and torque throughout the rpm range crankshaft

In order to avoid errors in electronic controller (ECU) of the car, correction signal from sensor of the oxygen is produced on outflow of a certain time after enabling the ignition (defines the user).

The Device can work with MAF, having both analog output, and pulsed.

The Optimizer supports broadband and zirconium sensors oxygen (Oxygen Sensor). When you work with broadband sensor possible exact measurement, maintenance and regulation of importance lambda (the composition fuel mixture).

Inputs of the optimizer can be configured for 3 modes:

1. "Optimizer" - the main  state of working;

2. "Emulator" - in this mode can be emulated signals for the lambda (oxygen sensor) probe based on the current amount of fuel and readings from a sensor of mass consumption. These data are compared with data obtained in the process of learning optimizer (the data may be adjusted by the user). Thus, the computer receives a full signal from the Oxygen Sensor and can support a given composition of the mixture, the lambda probe is not needed; 

3. "MAF (P)" - inputs Oxygen Sensor can be used for the correction of other analog signals with a level 0 ... 5 volts (for example - MAF, MAP, etc.)  In this mode possible functioning on diesel.

For increase drawing press on him...

  

Вывод на график 

 

 

Эмулятор лямбда зонда

      

Downloads instruction to optimizer SD-04 (1,3 Mb, pdf).

  • Fuel type: All
  • Number of channels: 3
  • Type MAF: Analog/impulse
  • A method of processing a signal of the oxygen sensor: Correction or emulation
  • Size: 110x65x33
  • Software: В комплекте
  • Power: 12В
  • Warranty: 1 year
Гена 2017-03-09

Тюнинг на ниссан максима

Установил самостоятельно и уже 2-й месяц с ним играюсь. Люблю поковырять что то такое.
Как результат - удалось сбить расход на 2 литра. Последняя моя настройка - при нажатии на газ обогащается смесь, а это ощутимо добавляет мощности когда нужно.
Буду тестить дальше!
ГЕНАДИЙ

Виталий 2016-05-25

SD-04 на Е34

Уникальная безальтернативная штука. Позволяет настраивать компьютеризированный инжектор с такой же свободой как карбюратор.

Но... на Е34 пока двигатель холодный, штатный ЭБУ игнорирует эту штуку по эмуляции лямбды. После игнора учет уже не восстанавливается, ни после прогрева, ни после перезапуска мотора. Только переподключением аккумулятора. Поэтому пока ограничился свободой коррекции ДМРВ без лямбды.

Сергей 2015-05-07

Установка с HHO

Постоянно устанавливаем оптимизаторы. Только с ними есть достойный результат на нормальных автомобилях.

Руслан 2014-06-11

Оптимизатор на Ниве

Купил месяц назад. Интересная вещица. Позволила мне хорошо поэкспериментировать с мотором и добиться хороших результатов с водородом. Только первое время пришлось почитать инструкции и привыкнуть к программе, которая входит в комплект

Оставьте свой отзыв !

Write your review

alternative chip tuning SD-04

alternative chip tuning SD-04

To itself CHIP tuning! The Processor optimizer (EFIE) fuel mixture for ingector SD-04

Optimizers is intended for correcting the factors of the engine. Can be used as alternative CHIP tuning engine for Your auto. This equipment under power even that cars, on which CHIP tuning is difficult.

Write your review

Our advantages

You can return any product purchased from us within 2 weeks, if for some reason it does not suit you or you do not like it. Also, we provide a free test of the Brown's gas generator for a period up to 1 month!

On all products we sell, we offer a guarantee for a period from 1 to 2 years (depending on the type of product).

Most of goods we offer can improve the performance of a car without violation of the guarantee for it.

Most of the products we offer we produce ourselves! This enables our customers not only to purchase products at competitive prices, but also to make clear immediately all the questions they have on the installation and use of the devices.

up